|
Core Drills
|
Accessories
|
|
1 1/4" - 7 Extension Rods
6", 12", or 24" extension rods for drills and bits threaded with 1 1/4" - 7.
Prices start at:
PRICE: $59.25
|
|
|
5/8" - 11 Extension Rods
6" or 12" extension rods for drills and bits threaded with 5/8" - 11.Prices start at:
PRICE: $47.00
|
|
A Tools Direct Core Bit Extend-A-Tube
The Extend-A-Tube Wet Drilling Core Bit System allows for quick and easy extended depth. All extensions are 12" in length. Several extensions of the same diameter can be connected for even greater depth. Available in a variety of diameters from 1" to 6 1/4".
Use only with Tools Direct wet bits.
Prices start at:
PRICE: $33.00
|
|
Adapter 1 1/4"-7(f) to 5/8"-11(m)
This adapter works great for using smaller diameter core bits threaded at 5/8"-11 on a core drill threaded at 1 1/4"-7.This coupler is usually required when using wet only core bits smaller than 2" in diameter.
PRICE: $44.50
|
|
Adapter 5/8"-11(f) to 1 1/4"-7(m)
This adapter works great for using larger diameter core bits threaded at 1 1/4"-7 on a grinder threaded at 5/8"-11. This coupler is usually required when using wet core bits 2" or larger in diameter.
PRICE: $43.75
|
|
BitBuddie
The perfect solution for cleaning as you go. This flexible, translucent rubber dust shroud captures both dust and slurry. Suction holds it in place.
This tool will handle bits up to 4" in diameter.
PRICE: $49.00
|
|
Core Drill Slurry Ring
Prevent splash, leakage, and overflow of concrete slurry by using a Slurry Ring. This handy little tool attaches to a wet vac and captures slurry during the drilling - saving time, as little cleaning is necessary after the hole is drilled. It works on smooth, rough, or inclined wall or floor surfaces.
This tool will handle bits up to 7" in diameter.
Prices start at:
PRICE: $166.00
|
|
Core Drill Stand - Diteq RH1531
This is the ideal stand for hold the Diteq Shibuya Hand Held Core Drill. It is available in a fixed or tilt version. Either version will support up to a 6 1/2" bit.
The tilt stand is shown in the picture with the optional slurry ring.
Prices start at:
PRICE: $622.00
|
|
Core Drill Stand - Husquarna DS 150
Designed to fit most handheld core drills with a collar diameter of 2 1/4" (60mm). Perfect for use with the Husqvarna DM 225 and the DM 230.
PRICE: $650.00
|
|
Core Drill Stand - MK Diamond Hand-Held Drills
Portable drill stand for MK-2000P and MK-130/3 hand-held drills. Combination anchor/vacuum base. Adjustable column for angle drilling.Prices start at:
PRICE: $1,015.00
|
|
Hilti Core Drill Adapters
We don't carry Hilti drills or Hilti bits, but we do have adapters that will fit their core drills and our bits. Please call us at 1-866-268-2600 if you have any questions. The right adapter can save you lots of money!
Prices start at:
PRICE: $41.52
|
|
Jacobs Chuck Adapter
This adapter allows you to use core bits threaded at 5/8"-11 in standard electric drills. The adapter is available with either a 3/8" or a 1/2" shank.Prices start at:
PRICE: $42.84
|
|
Milwaukee Core Drill Motors
Use one of these motors to repair that old core drill rig. These are brand new motors that will get you back up and running.Prices start at:
PRICE: $988.00
|
|
SDS-Max Adapter
Use this adapter to convert your rotary/hammer drill with the SDS-Max fitting into a core drill with a 5/8"-11 thread.
PRICE: $73.88
|
|
SDS-Plus Adapter
Use this adapter to convert your rotary/hammer drill with the SDS-Plus fitting into a core drill with a 5/8"-11 thread.
PRICE: $61.00
|
|
Spline Drive Adapter
Use this adapter to convert your rotary/hammer drill with the spline drive fitting into a core drill with a 5/8"-11 thread.
PRICE: $58.53
|
|
Water Swivel Adapter
Use this adapter to convert your dry drill into a wet drill. This adapter has a 1/2" shank with a 5/8"-11 spindle thread.
PRICE: $184.00
|
|
Water Swivel Adapter - Grinder
Use this adapter to convert your grinder into a wet drill. This adapter has a 5/8"-11 female shank thread with a 5/8"-11 spindle thread.
PRICE: $179.00
|
|
Water Tank (metal)
Heavy-duty 4 gallon metal tank. Portable, pressurized water supply with 10ft. hose and brass fittings.
PRICE: $163.00
|
|
Water Tank (plastic)
If there is no water supply nearby, you can use a pressurised water tank. Pumping the handle a few times gives the required pressure. The tank holds 4 gallons and comes complete with a 9' 10" hose which is connected to the machine.
PRICE: $69.00
|
