| |
|
|
|
Search Results
Found 4 product(s) for Diamond Core Bits - Wet:Concrete - Short Bit (1-4 of 4)
|
Diamond Core Bits - Wet
|
Concrete - Short Bit
|
|
C23 Short Thin Wall Wet Diamond Core Bit by Diteq
This diamond core bit is designed for general drilling where space is an issue. At only 10" tall, this bit gets into areas other bits can't. It can be used with hand-held drills or on a rig.
Bits 1/2" to 1 1/2" in diameter are threaded for a 5/8" - 11 adapter. Bits 1 5/8" and larger are threaded for a 1 1/4" - 11 adapter.
Use wet only.
Prices start at:
PRICE: $76.00
|
|
C34 ARIX Short Diamond Core Bit by Diteq - PRO SERIES
This Dry Cut Diamond Core Bit is ideal for use with a hand-held drill on light weight concrete block and soft to medium concrete with light to medium rebar. Now utilizing ARIX technology to give you maximum productivity with the lowest possible cost per inch/foot cut. The aggressive segment design grips surface to prevent slippage providing for faster hole starting.
Core travel is 9", thread size is 1 1/4"-7.
Use wet or dry.
Prices start at:
PRICE: $105.60
|
|
|
C34 ARIX Short Diamond Core Bit by Diteq - Standard
This Dry Cut Diamond Core Bit is ideal for use with a hand-held drill on light weight concrete block and soft to medium concrete with light to medium rebar. Also works well on natural stone products including granite and marble. Now utilizing ARIX technology to give you maximum productivity with the lowest possible cost per inch/foot cut. The aggressive segment design grips surface to prevent slippage providing for faster hole starting.
Core travel is 9", thread size is 5/8"-11.
Use wet or dry.
Prices start at:
PRICE: $96.80
|
|
S33 Granite, Marble & Stone Specialty Diamond Core Bit by Diteq
These high performance diamond core bits are laser welded for the ultimate in strength and durability. Special diamond segment formulations make the S33 ideal for fabrication shops. They can also be adapted for use in construction wherever holes may be needed for water, gas, and electrical piping. Use to cut granite, marble, & stones.
5/8"-11 threads, 4" long.
Use wet or dry.
Prices start at:
PRICE: $52.00
|
|
| | |
| | | | |
