| |
|
|
|
Search Results
Found 6 product(s) for Diamond Core Bits - Wet:Granite, Stone & Glass (1-6 of 6)
|
Diamond Core Bits - Wet
|
Granite, Stone & Glass
|
|
C34 ARIX Short Diamond Core Bit by Diteq - Standard
This Dry Cut Diamond Core Bit is ideal for use with a hand-held drill on light weight concrete block and soft to medium concrete with light to medium rebar. Also works well on natural stone products including granite and marble. Now utilizing ARIX technology to give you maximum productivity with the lowest possible cost per inch/foot cut. The aggressive segment design grips surface to prevent slippage providing for faster hole starting.
Core travel is 9", thread size is 5/8"-11.
Use wet or dry.
Prices start at:
PRICE: $96.80
|
|
C62AX ARIX Wet Diamond Core Bit by Diteq
This is the best diamond core bit for fast cutting of heavy steel, hard aggregates, river gravel, granite quartz, and similar material.
ARIX technology gives you maximum productivity with the lowest possible cost per inch/foot cut. Diamonds are individually placed in strategic positions to maximize cutting performance.
Use wet only.
Prices start at:
PRICE: $130.00
|
|
Diteq N25 NCB Non-Coring Diamond Bit
These core bits are designed to drill holes through all kinds of granite and porcelain. Great for installing anchors.5/8"-11 threads, 2" coring length. Use wet only. Prices start at:
PRICE: $56.00
|
|
Husqvarna Banner Line General Purpose Diamond Core Bit
Banner Line Diamond Core Bits are used for general purpose drilling of concrete, masonry and brick. This includes concrete with soft to hard aggregate and light to medium steel reinforcing and is also effective on granite, marble and stone.
Use wet only.
Prices start at:
PRICE: $86.20
|
|
S23 Thin Wall Crown Diamond Core Bit by Diteq
Designed to drill clean, smooth holes such as faucet-mounting holes in counter tops and for use in the construction trades wherever holes may be needed for water, gas and electrical piping - especially when natural stone is already installed. For cutting hard materials like porcelain, granite and glass.
5/8"-11 threads, 4" long.
Use wet only.
Prices start at:
PRICE: $66.40
|
|
S33 Granite, Marble & Stone Specialty Diamond Core Bit by Diteq
These high performance diamond core bits are laser welded for the ultimate in strength and durability. Special diamond segment formulations make the S33 ideal for fabrication shops. They can also be adapted for use in construction wherever holes may be needed for water, gas, and electrical piping. Use to cut granite, marble, & stones.
5/8"-11 threads, 4" long.
Use wet or dry.
Prices start at:
PRICE: $52.00
|
|
| | |
| | | | |
