Product Overview
Includes FREE Regular Ground Shipping!
With other types of pumps, the water is pumped directly by the impeller, which is therefore worn much faster. A Hycon VORTEX pump works much differently. The impeller at top creates a revolving mass of water which forms a vortex. At the center is a cone of air. The water and it's solids are forced away from the impeller. Because there is very little contact between the water and the impeller, wear is greatly reduced as compared to other types of pumps. If it can flow to the pump then the pump can lift it out!
The Hycon Pump is primarily made out of aluminum. It will pump saltwater, but you will need to rinse it with freshwater after use. Long exposure to saltwater will corrode this pump. Most pump manufactures recommend a freshwater flush after every use in saltwater.
This unit is available with or without a 30' discharge hose ("with hose" option includes both camlock fittings, "without hose" option includes only the camlock male hose fitting). This hose is a European Blue Hose. The European Blue Hose has the same high quality as a USA Gray or Black hose.
The 2" pump has a maximum capacity of 225 GPM. The maximum Total Head is 92 ft.
The 2" requires oil flow of 5-8 gpm. Maximum pressure of 2500 psi.
1/2" id Flush-Face Fittings
1 year warranty
2" weight - 17 lbs without hose
This tool does not come with a powerpack or hydraulic hoses. Hycon submersible pumps can be connected to any HYCON power pack with matching oil flow gpm requirements or other hydraulic power sources via the Hycon Oil Flow Divider. They can be found here: Hycon Powerpacks - Hycon Hydraulic Hoses - Hydraulic Oil Flow Divider
See the 4" pump in action:
